The Hengrui remote-controlled climbing drilling machine is equipped with an extended drill pipe, which helps with drilling operations on high and steep slopes

At construction sites such as highway slopes, mine slopes, and mountain land reclamation, large slopes and complex terrain often pose significant challenges to drilling operations. Especially when conducting anchor rod and anchor cable construction on high and steep slopes, the climbing ability of the equipment, drilling stability, and drill pipe length all directly affect the on-site construction. The Hengrui mechanical company has launched the remote-controlled climbing drilling machine, which adopts a four-wheel drive and traction-assisted structure. It can operate in steep slope environments and complete equipment operations through remote control. Depending on different construction requirements, the equipment can also be equipped with an extended drill pipe.

In slope anchor rod construction, the drilling depth is one of the important factors in equipment selection. The Hengrui remote-controlled climbing drilling machine can adapt to different specifications of drill tools according to construction needs and supports customizing the drill pipe length. With an extended drill pipe, it can meet the drilling depth requirements of different depths and reduce the construction process of frequently adjusting the drill tools. For slope engineering that requires deeper drilling, the extended drill pipe enables a more continuous drilling process and makes it convenient for construction personnel to configure the equipment according to the actual rock layer and hole depth requirements.

The Hengrui remote-controlled climbing drilling machine operates through remote control, allowing construction personnel to control the equipment from a relatively safe position. The equipment can be used for slope construction scenarios such as anchor rod and anchor cable drilling and can adapt to complex slope environments. Through remote movement, adjustment, and drilling, the workload of personnel frequently carrying equipment up and down the slope can be reduced, making slope construction more convenient.

Slope construction is different from flat ground operations. The equipment needs to have good slope adaptation capabilities. The Hengrui remote-controlled climbing drilling machine adopts four-wheel drive and combines traction assistance, and can move on the slope according to the construction environment. The climbing ability of the equipment can cover slope operations ranging from 0 to 90 degrees, providing equipment support for high and steep slope drilling construction. At the same time, the drilling machine platform can be adjusted according to construction requirements, making the drilling angle more flexible and suitable for slope drilling operations in different directions.

For high and steep slope projects, the equipment not only needs to be able to "climb up" but also needs to be able to complete drilling on the slope stably. The Hengrui remote-controlled climbing drilling machine combines remote control operation, slope movement, drilling construction, and extended drill pipe configuration to provide a more flexible equipment solution for complex slope construction. From the equipment entering the slope, moving to the designated hole position, and using the extended drill pipe to complete the drilling, the entire construction process can be adjusted according to the site conditions and is suitable for different types of slope projects.